Pyronix 256 - Page 93

PCX SMS AND PCX 256 SYSTEM MANUAL
RINS871-3 Page: 93
Enter the address of the ROX you wish to view.
Repeat for each ROX. Press the Okey.
Enter the address of the Keypad you wish to view.
Repeat for each Keypad. Press the Okey.
Enter the address of the Reader you wish to view.
Repeat for each Reader. Press the Okey. ‘View
PSUs’ will be displayed, press the Pkey.
To view the input diagnostics, press the Okey.
To view the Endstation inputs only, press the Okey.
The status of the inputs will be shown.
C = Closed. O = Open. F = Fault
Press the Okey.
The circuit resistance will be shown on any on the
inputs you choose (enter the input number).
Press the Pkey.