Pyronix Matrix 832 Installation Guide

Matrix 832 / 832+ / 424
Page 20 RINS428-5
5.7 First to Alarm Mode
When the system is in alarm mode it resets either automatically or by entering a valid user code. When the
system is reset entering the user code the first zone to alarm will be displayed on the display. One further
user code entry will clear the FTA and reset the panel to disarmed mode.
5.8 Engineer Mode
Engineer Mode gives total access to the programming facilities of the system to the engineer using the
engineer code.
5.9 User Mode
User mode allows arming / disarming of the panel and access to the user menu (See the user guide for user
programming instructions).

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English