Pyronix Matrix 832 Installation Guide

Matrix 832 / 832+ / 424
Page 70 RINS428-5
SUPPLY
FAU L T
ARMED
P.A.READY
TAMPER
FIRE
DAY
ALARM
8
8
A
BCD
2
1
34
S
ET
FUNC
P.
A
.
FIRE
5678
90
Keypad Programming Procedure
7.13.1 Bell Time
Enter BW followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]…[99] (in minutes or seconds). To save the changes press
B. An acceptance tone will be played.
7.13.2 Bell Time Delay
Enter BW followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]…[99] (in minutes). To save the changes press
B. An
acceptance tone will be played.
7.13.3 Entry Time
Enter BWT followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]…[99] (in seconds). To save the changes press
B. An
acceptance tone will be played.
7.13.4 Exit Time
Enter BWU followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]…[99] (in seconds). To save the changes press
B. An
acceptance tone will be played.
7.13.5 Final Exit Delay
Enter BWV followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]…[99] (in seconds). To save the changes press
B. An
acceptance tone will be played.
7.13.6 Auto-Arm Commencing Time – Every Day
Enter BWW followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter four digits [0000]*…[2359] for the time the partition will arm every day.
An acceptance tone will be played.
[0000]* = Auto-Arm time disabled
7.13.7 Inactivity Auto-Arm
Enter BWX followed by the one digit for the desired partition number from [1 - 4]. The current time is
displayed. To change the time, enter two digits [00]*…[99]* (multiple per 10 min). To save the changes press
B. An acceptance tone will be played.
[00]* = auto-arm disabled
[99]* = auto-arm at 990 minutes non activity registered
7.13.8 AC Fail Warning & Report Delay
Enter BWY. The current time is displayed. To change the time, enter two digits [00 - 99] (in minutes). To
save the changes, press
B. An acceptance tone will be played.
7.13.9 Telephone Line Fail Warning & Report Delay
Enter BWZ. The current time is displayed. To change the time, enter two digits [00 - 99] (in minutes). To
save the changes, press
B. An acceptance tone will be played.
7.13.10 Seconds in Last Minute of the Day
Enter BW[. The current time is displayed. To change the time, enter two digits [00 - 99] (in seconds). To
save the changes, press
B. An acceptance tone will be played.

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English