Pyronix Matrix 832 Installation Guide

Matrix 832 / 832+ / 424
Page 92 RINS428-5
9.7 DD243 Options 1
Enter BZ. Use the > and ? keys to select an option to change.
To change the state of the option, press the
C key once. Repeated pressing of the C key toggles the state.
Option Off / LED Off On / LED On Default
1
Enable DD243 Options 2-8 No Yes Off
2
Open set zone stops confirmation No Yes On
3
Open entry zone stops confirmation No Yes Off
4
Auto Omit Open Zones At End Of Bell Time At End Of
Confirmation Time
At End Of Bell Time
5
Lost zone expander causes confirmed
alarm
No Yes Off
6
Fire, PA and Medical keys disabled No Yes Off
7
Entry time end Re-enable
confirmation
Do not re-enable On
8 Spare
To save all changes press the B key. An acceptance tone will be played and the function will end.
9.8 DD243 Zone Map
Enter BZT. Enter the zone number [01 - 32]. An acceptance tone will be heard and the current zone
map will be displayed. Enter a new zone map [01 - 99] for this zone. Press
B to save the new value. A
confirmation tone will be played.
9.9 DD243 Partition Confirmation Times
Enter BZV. Enter a partition number [1 - 4]. An acceptance tone will be heard and the current
confirmation time for this partition will be displayed. Enter the new confirmation time [01 - 99] in minutes for
this partition. Press
B to save the new value. A confirmation tone will be played.

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English