SECTION 3
OPERATING PRINTER
49
Printing from FlexMail 4.3
This section describes the process of designing a Template (Layout) and printing to the AS-650 printer model. This
section does not
provide information on using other FlexMail functions, such as Importing a Mailing List,
Validating/Cleaning records or other FlexMail features. Please contact FlexSystems (www.flex-systems.com) for
help with FlexMail features/functions that are not outlined in the following procedure.
1. Open FlexMail
A new “Project” window will open in
the “Designer” view, displaying a
Layout representing the current
“default” Printer and “default” page
size.
TIP: If you want FlexMail to open with
a Layout representing the AS-650
printer and a specific page size; right-
click on the AS-650, in the “Devices
and Printers” folder, and choose “Set
as default printer”. Also be sure to
select and apply your desired Printing
Preferences in the driver.
2. If the AS-650 is not the selected model, click on “Print Setup” button and
select the AS-650 from the list.
3. Click on “Page Size” button, to change the page size.
If your desired page size is not available in the pull-down list,
select “User defined size” from the list. Then type the “Width” (length in
direction of feed) and “Height” of the page size you
want to use for this Project and Layout.
TIP: As an alternative to creating a
“User defined size”, please see section titled “Adding
New Form Size (Paper Size)”.
IMPORTANT: The page “Width” value must match
the media length (in direction of feed) that you plan
to feed and print onto.
To Next Page
Loading...
