Quantum Data 881 - Page 200

188 Chapter 5 Working with Formats
The screen below shows the Format Table Configuration Screen. This screen enables you
to configure the fields for the format report.
The table below describes the fields and buttons for the Table Configuration Screen.
Entity Description / Function
Column Choices Configuration
Field
Provides a list of format parameters to select and move
to the report.
Column in the Table Configuration
Field
Shows the current list of format parameters that will
appear in the report. The format parameters will appear
in the order (top to bottom / left to right) in the report.
Add Activation Button Enables you to move format parameters from the
Column Choices to the Columns in the Table (that will
appear in the reports).
Remove Activation Button Enables you to remove format parameters from the
Columns that will appear in the table.
Remove All Activation Button Enables you to remove all the format parameters
currently shown in the Column in the Table field.
Move Up Activation Button Enables you to change the order (move up) the selected
format parameters in the Columns in Table that will
appear in the format report. The top most parameters
will appear in the left most side of the report.
Move Down Activation Button Enables you to change the order (move down) the
selected format parameters in the Columns in Table that
will appear in the format report. The top most
parameters will appear in the left most side of the report.