882 Video Test Instrument User Guide (Rev A.35) 17
2. Choose the folder you want to open by pressing the adjacent soft key. The contents of
the folder appears on the 882’s display. If you need to return to the previous menu list
press the back (settings) key.
3. Continue selecting folders to open until you locate the item you need. To use an item,
press the adjacent soft key.
Setting the 882’s path
The 882 can be set to access format, image, and sequence files stored on its flash
memory, PC card, or on a file server. To do this, you must set the 882’s path to point to the
corresponding folders on the desired medium. You can set the path using the command
line interface or the front panel.
To set the 882’s path using the front panel:
1. Place the 882 in Browse mode by holding down the Tools key until the media menu
appears on the 882’s display as shown below.
2. Choose the desired medium by pressing the adjacent soft key. The folders on the
selected medium (for example flash memory) appear on the 882’s display as shown
below.
3. Press the soft key adjacent to the Library folder. The contents of the selected folder
appears on the 882’s display as shown in the example below.
4. Press the soft key adjacent to the folder you want to use. For example, to set the format
path, press the soft key adjacent to Formats. The contents of the Formats folder
appears on the 882’s display.
Fonts FormatLib
Formats Images
Sequence UserData
Users WebFiles
Flashmem
NetPlace
PCCard
Cache
System Library
Fonts FormatLib
Formats Images
Sequence UserData
Users WebFiles
To Next Page
Loading...
