882 Video Test Instrument User Guide (Rev A.35) 471
PDAX:GFCL
Pixel Data Analyzer for Golden FRaMe CApture
Load
Class Signal analyzer - Pixel data
Description Loads a captured frame from a file on the Card media. This file is then used as a reference
frame or “golden” frame for comparison with subsequent captured frames.
Command syntax PDAX:GFCL filename
filename
the filename used for the captured reference frame. The default location of the
captured reference frame is on the Card media “/card0”.
Example
PDAX:CAPF // captures a reference frame
PDAX:GFCA myref // saves the reference frame to the file “myref” in
the /card0 location
PDAX:FRMS 10 // sets the number of frames to analyze in the pixel
data analysis test to 10
PDAX:REFG 0 // (mandatory) disables auto reference capturing for
the pixel data analysis test
PDAX:GFCL myref // loads the file “myref” as the reference frame
PDAX:GFCU myref // applies the previous load file command
PDAU: // runs the pixel data analysis test
PDAX:NERR? // examine the results
PDAX:ERRQ? // checks the error log
Related commands PDAX:MXER, PDAX:RPTG, PDAX:REFG, PDAX:CAPF, PDAU
To Next Page
Loading...
