882 Video Test Instrument User Guide (Rev A.35) 515
SDLY
Sequence step DeLaY
Class Sequence editor control
Description Sets how long a sequence step will pause before advancing to the next step in the auto
run mode. A sequence step will use the last value set by the SDLY command. The SDLY?
query returns the current setting of SDLY.
Command syntax SDLY delay | -frames
delay
Delay time in seconds as a floating point number.
frames
Delay in frames. Type minus (-) character before integer.
min = 0.0 seconds; -1 frame
max = 1.70E38 seconds (infinite)
Query syntax SDLY?
Query response delay
Other required
commands
SMOD setting must be equal to 3 in order for the SDLY setting to have any affect on
sequence operation.
Example
SDLY 5.0 // Set delay to five seconds per step
SDLY -3 // Set delay to three frames per step
To Next Page
Loading...
