516 Appendix A Command Reference
SDGM
Sonic Data Gate for SPDIF output
Class Parameters (Audio Signal and Timing)
Description Configures what audio (from what source) is transmitted out the SPDIF audio output port.
Note: This command applies only to the 882EA.
Command syntax SDGM mask
mask
0 = HDMI Rx - SPDIF OUT audio content is from the audio on the HDMI Rx port.
1 = Internal - SPDIF OUT audio content is from the internal SPDIF audio generator.
2 = SPDIF IN - SPDIF OUT audio content is from the audio received from the SPDIF
Input.
Example 1
SDGM 2 // Causes the 882EA pass the SPDIF audio received from its SPDIF
IN connector out through the SPDIF OUT connector.
Example 2
SDGM 0 // Causes the 882EA pass the SPDIF audio received from its HDMI
IN connector out through the SPDIF OUT connector.
Example 3
SDGM 1 // Causes the 882EA pass the SPDIF audio received from its
internal SPDIF generator out through the SPDIF OUT connector.
To Next Page
Loading...
