Quantum CHECK POINT SPARK 1500 Series - Page 104

Backup, Restore, Upgrade, and Other System Operations
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 104
To configure a periodic backup:
1. In Device > System Operations > Backup and Restore System Settings, click Settings.
The Periodic Backup Settings window opens.
2. Click Enable scheduled backups.
3. Configure the file storage destination:
a. Select the Protocol: SFTP or FTP.
b. Enter a Backup server path.
c. Enter a username and password.
d. Click Apply.
4. Optional - Select Use file encryption.
If you select this option, you must enter and confirm a password.
5. In Schedule Periodic Backup, select frequency:
n
Daily - Select time of day (hour range).
n
Weekly - Select day of week and time of day.
n
Monthly - Select day of month and time of day. Note - If a month doesn't include the selected
day, the backup is executed on the last day of the month.
6. Click Apply.