Quantum CHECK POINT SPARK 1500 Series User Manual

Boot Loader
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 291
Boot Loader
The Gaia Embedded Boot Menu shows during boot and is available if you press CTRL+C while the
appliance boots if you have a console connection.
The menu contains the available options:
When you are in Boot Loader, all interfaces are down and you can only activate them for options that require
connectivity. At this point Check Point's services are not active.
n
Options 1-3 start the appliance.
l
Normal mode is the default boot mode for the appliance.
l
Debug mode boot gives printouts of processes that are initialized during boot.
l
Maintenance mode boots the machine and gives access only to the file system (network
interfaces, Check Point processes and the appliance's services are down).
Note - During normal/debug boot, if there is an error and the appliance cannot boot properly, it reverts
to maintenance mode and the Power LED turns a constant red.
n
Options 4-5 are explained in the subsequent sections.
n
Option 6 restarts the appliance.
n
Option 8 uploads a preset configuration file.

Quantum CHECK POINT SPARK 1500 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1500 Series
Category	Network Hardware
Language	English