Configuring the QoS Blade
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 188
Configuring the QoS Blade
In the Access Policy > QoS Blade Control page you can activate QoS, define the QoS default policy, and
add manual rules.
The QoS (bandwidth control) policy is a set of rules that lets you set bandwidth parameters to control the
flow of communication to and from your network. These rules make sure that important traffic is prioritized
so your business can work with minimum disruption when there is network congestion.
QoS can be activated on Internet connections and requires at least one Internet connection to be configured
with the maximum download and/or upload speeds provided by your ISP. For more information about your
download and upload speeds, contact your local ISP.
This page lets you configure a default simplified QoS policy. You can configure a more advanced policy in
the Access Policy > QoS Policy page.
QoS policy applies to traffic over external interfaces only.
QoS
Select one of the options to set the Access Policy control level:
n
On - Enforces the default QoS policy.
n
Off - QoS default policy is not enforced.
Note - When the blade is managed by Cloud Services, a lock icon is shown. You cannot toggle
between the on and off states. If you change other policy settings, the change is temporary. Any
changes made locally will be overridden in the next synchronization between the gateway and Cloud
Services.
To Next Page
Loading...
Need help?
General
