Quantum CHECK POINT SPARK 1500 Series User Manual

Configuring Anti-Spam Exceptions
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 216
Configuring Anti-Spam Exceptions
In the Threat Prevention > Anti-Spam Exceptions page you can configure:
n
Safe senders (email addresses) and/or domains or IP addresses from which emails are not
inspected.
n
Specific senders and/or domains or IP addresses that Anti-Spam engine blocks regardless of its own
classification.
To block or allow by senders requires the Anti-Spam engine to be configured to filter based on Email
content in the Threat Prevention > Anti-Spam Blade Control page.
Note - IP address exceptions are ignored for POP3 traffic.
To add a new sender/domain/IP address to the Allow or Block list:
1. Click Add or New in the Allow or Block list.
2. Enter the IP address or Sender/Domain.
3. Click Apply.
To edit or delete a sender/domain/IP address from the Allow or Block list:
1. Select the relevant row in the Allow or Block list.
2. Click Edit or Delete.
If the options are not visible, click the arrows next to the filter box.

Quantum CHECK POINT SPARK 1500 Series Specifications

General

Brand	Quantum
Model	CHECK POINT SPARK 1500 Series
Category	Network Hardware
Language	English