Configuring QoS
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 33
Configuring QoS
Introduction
The QoS (bandwidth control) policy is a set of rules that lets you set bandwidth parameters that control the
flow of traffic to and from your network. They make sure that important traffic is prioritized and your business
has minimal disruption when there is network congestion.
QoS can be activated on Internet connections and requires at least one Internet connection is configured
with the maximum download and/or upload speeds. You get the speed information from your ISP.
QoS policy rules apply separately on each configured Internet connection.
Prerequisites
In Access Policy > QoS > Blade Control, make sure the QoS blade is turned on.
Configuration
1. In Device > Internet, select an Internet connection and click Edit.
2. In the Advanced tab, edit the QoS Settings.
These values are used as a 100% percent baseline when you calculate QoS weight. For more details,
see
"Configuring Internet Connectivity" on page54
.
3. You can use these options:
n
A default QoS policy that requires defining only a number of parameters. See
"Configuring the
QoS Blade" on page188
.
n
Define manual rules for further granularity if necessary in Access Policy > QoS > Policy. See
"Working with QoS Policy" on page190
.
To Next Page
Loading...
Need help?
General
