Configuring Wireless Network
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 74
DNS Server Settings (For DHCPv4)
These settings are effective only if a DHCPv4 server is enabled.
n
Auto - This uses the DNS configuration of the appliance as configured in the Device > DNS and
Device > Internet pages.
n
Use the following IP addresses - Enter the IP addresses for the First DNS server, Second DNS
server, and Third DNS server.
Default Gateway
Select one of these options:
n
Use this gateway's IPaddress as the default gateway.
n
Use the following IP address - Enter an IP address to use as the default gateway.
WINS
Select one of these options:
n
Use the WINS servers configured for the internet connection
n
Use the following WINS servers - Enter the IP addresses of the First and Second WINS servers.
Lease
Lease time - Configure the timeout in hours for a single device to retain a dynamically acquired IP address.
Other Settings
You can optionally configure these additional parameters so they will be distributed to DHCP clients:
n
Time servers
n
Call manager
n
TFTP server
n
TFTP boot file
n
X Window display manager
n
Avaya IP phone
n
Nortel IP phone
n
Thomson IP phone
Custom Options
Lets you add custom options that are not listed above. For each custom option, you must configure the
name, tag, type, and data fields.
When you finish editing the network, click Apply.
Wi-Fi Quality Analyzer
Background
The Wi-Fi Quality Analyzer detects the Wi-Fi networks near the appliance and shows the report with this
information:
To Next Page
Loading...
Need help?
General
