Configuring Remote Access Users
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 222
To add remote access permissions for users defined in the RADIUS group:
1. Click Add > RADIUS Group.
2. If no RADIUS group was defined, you are prompted to configure one.
3. Select or clear the Enable RADIUS authentication for remote access users checkbox.
4. When selected, choose which users are given remote access permissions:
n
To allow all users defined in the RADIUS server to authenticate - Select All users defined on
RADIUS server
n
Specific user groups defined in the RADIUS server - Select For specific RADIUS groups only
and enter in the text field the names of the user groups separated by commas
n
To allow administrators with read-only permissions to authenticate - Select Read-only
Administrators
5. Click Apply.
The RADIUS server or specific users from the RADIUS server are added to the table on the page.
Two-Factor Authentication
Two-Factor Authentication, also called multi-factor authentication, is an extra layer of security to prevent
unauthorized access to your system. To use Two-Factor Authentication, users must have remote access
permissions configured, with an email address and mobile phone number.
You can use the Check Point SMS provider, or an external SMS provider. If a customer uses a public SMS
server, the administrator must provide the username and password for the SMTP server.
To Next Page
Loading...
Need help?
General
