Managing the Device
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 54
Managing the Device
This section describes how to set up and manage your Quantum Spark Appliance.
Configuring Internet Connectivity
The Device > Internet page shows how the appliance connects to the internet.
On this page you can:
n
Configure a single internet connection or multiple connections in High Availability or Load Balancing
configurations. When multiple internet connections are defined, the page shows them in a table.
n
Add a new connection and edit, delete, or disable existing connections.
n
Monitor the servers and internet connections (see
"Monitoring" on page68
).
We recommend you contact your local Internet Service Provider (ISP) to understand how to configure your
specific internet connection.
Notes - ADSL/VDSL settings are relevant only for devices that have a DSL port. . In 1570 / 1590 appliances,
you can also configure a DSL connection over the DMZ port (see
"To configure an internet connection over
the DMZ port:" on the next page
).
To configure an internet connection:
1. Click Configure Internet (if not configured at all), Add (for another Internet connection), or Edit.
The New or Edit Internet Connection window opens.
2. Configure the fields in the tabs as described below.
To Next Page
Loading...
Need help?
General
