Advanced Settings
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 150
User
Awareness
Attribute
Description
Assume
single user
per IP address
When Active Directory Queries is enabled in Users & Objects > User
Awareness the parameter indicates that only one user can be identified from
a single device. When two or more users connect from a device, only the last
user to log on is identified.
Log blocked
unknown
users
Indicates if unauthenticated users that are blocked are logged when Block
unauthenticated users when the captive portal is not possible is selected
in Users & Objects > User Awareness > Browser-Based Authentication >
Identification tab.
Table: User Awareness Attributes (continued)
User Management Attribute Description
Automatically delete expired
local users
Automatically delete all expired local users every 24 hours
(after midnight).
Table: User Management Attributes
VPN Remote
Access Attribute
Description
Allow clear
Traffic while
disconnected
Indicates if traffic to the VPN domain is handled when the Remote Access
VPN client is not connected to the site is sent without encryption (clear) or
dropped.
Allow
simultaneous
login
Indicates if a user can log in to multiple sessions. If the option is disabled,
and a user logs in a second time with the same credentials, the previous
session is disconnected.
Authentication
timeout
Indicates the amount of time (in minutes) the remote client's password
remains valid if timeout is enabled.
Authentication
timeout enable
Indicates if the remote client's password remains valid only for a
configured amount of time (Authentication timeout attribute).
Auto-disconnect
in VPN domain
Indicates if the client disconnects automatically to save resources when it
connects from inside the secured internal network (local encryption
domain).
Back
connections
enable
Enable back connections from the encryption domain behind the gateway
to the client.
Table: VPN Remote Access Attributes
To Next Page
Loading...
Need help?
General
