Quantum CHECK POINT SPARK 1500 Series - Page 168

Working with the Firewall Access Policy
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 168
To clone a rule:
Clone a rule to add a rule that is almost the same as the one that already exists.
1. Select a rule and click Clone.
2. Edit the fields as necessary.
3. Click Apply.
To edit a rule:
Note - For Access Policy rules, you can only edit the tracking options for automatically generated rules.
1. Select a rule and click Edit.
2. Edit the fields as necessary.
3. Click Apply.
To delete a rule:
1. Select a rule and click Delete.
2. Click Yes in the confirmation message.
To enable or disable a rule:
n
To disable a manually defined rule that you have added to the rule base, select the rule and click
Disable.
n
To enable a manually defined rule that you previously disabled, select the rule and click Enable.
To change the rule order:
1. Select the rule to move.
2. Drag and drop it to the necessary position.
Note - You can only change the order of manually defined rules.