Quantum CHECK POINT SPARK 1500 Series - Page 192

Working with QoS Policy
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 192
To edit a QoS rule:
Note - For Access Policy rules, you can only edit the tracking options for automatically generated rules.
1. Select a rule and click Edit.
2. Edit the fields as necessary.
3. Click Apply.
To delete a QoS rule:
1. Select a rule and click Delete.
2. Click Yes in the confirmation message.
To enable or disable a QoS rule:
n
To disable a manually defined rule that you have added to the Rule Base, select the rule and click
Disable.
n
To enable a manually defined rule that you have previously disabled, select the rule and click Enable.
To change the QoS rule order:
1. Select the rule to move.
2. Drag and drop it to the necessary position.
Note - You can only change the order of manually defined rules.