Quantum CHECK POINT SPARK 1500 Series - Page 262

Managing Authentication Servers
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 262
To edit a RADIUS server:
1. Click the IP address link of the RADIUS server you want to edit.
2. Make the necessary changes.
3. Click Apply.
The changes are updated in the RADIUS server.
To delete a RADIUS server:
Click the Remove link next to the RADIUS server you want to delete.
The RADIUS server is deleted.
To configure remote access permissions for users defined in the RADIUS server:
1. Click Permissions for RADIUS users.
2. Select or clear the Enable RADIUS authentication for User Awareness, Remote Access and
Hotspot checkbox.
When selected, for Remote Access, select or clear to use specific RADIUS groups only.
3. Click Apply.
Note - Configure remote access permissions for RADIUS users in the VPN > Remote Access Users page.