Quantum CHECK POINT SPARK 1500 Series - Page 264

Managing Authentication Servers
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 264
Note - You cannot select a user from the Active Directory, only an Active Directory user group. You
can select a local user.
3. Click Apply.
To edit an Active Directory:
1. Select the Active Directory from the list.
2. Click Edit.
3. Make the relevant changes and click Apply.
To delete an Active Directory:
1. Select the Active Directory from the list.
2. Click Delete.
3. Click OK in the confirmation message.
Note - This page is available from the VPN and Users & Objects tabs.