Radwin 5000 - Page 100

RADWIN5000ConfigurationGuide Release4.9.17 4‐22
Security ManagingtheSector
Figure4‐7:SectorSecuritysettings
TheSecuritydialogenablesyoutochangetheLinkPasswordandtheSNMPCommunity
stringsaswellaschangetheSecurityMode.IfyouhaveAES256Encryptionsupport
1
,the
checkboxwillbeenabledattheHBS.ThisitemdoesnotappearontheHSUConfiguration
panel.FordetailsaboutconfiguringandusingAES256,seeConfiguringAES256Encryption
Support.
ChangingtheLinkPassword
Thisitemisavailableasfollows:
• AtanisolatedHBS(NoactiveHSUs)
• AtanisolatedHSU
• NeverforanactiveHSU
Herearethedetails:
Thedefaultpasswordiswireless‐p2mp.Optionally,youcanchangethelinkpasswordas
explainedhere.
1. NotavailablefortheRADWIN5000JET