Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 4‐39
RADIUS ManagingtheSector
RADWIN_ServiceCategory = 2,
RADWIN_Name = "Name4.3",
RADWIN_Location = "Loc4.3",
RADWIN_Vlan = 33,
RADWIN_RegisterAvailability = 1
ThisaboveexampleshowsthattheHBScalled“Jig4x”hasanIPaddressof10.112.5.200,
andhastwoHSUsconnected:
ThefirstHSUhasaserialnumberofVERIFI2X5KLXY444.Thisisauniquenumberthatis
suppliedbyyourvendorforthisspecificHSU(seeInventoryonpage 4‐20).Thisunithasa
ServiceCategoryof“1”,whichtranslatesinto“Residential1”accordingtotheDataDiction‐
aryabove.Itsnameis“Name4.4”,andLocationis“Loc4.4”andwill appearassuchinthe
RADWINManager(seeSystemonpage 4‐2).IthasaVLAN,andisdefinedas44(seeMan‐
agementonpage 4‐8).ThisalsoinstructstheHBStoregisterthisHSU.
ThesecondHSUhasaserialnumberofVERIFI2X5KLXY2221,aServiceCategoryof“2”,
whichtranslatesinto“Residential2”,itsnameis“Name4.3”,andLocationis“Loc4.3”,it
hasaVLAN(definedas33).Here,too,theHBSisinstructedtoregisterthisHSU.
IfyouaddHSUstothesector,makesureyouupdatetheUsersfileontheRADIUS
server,otherwisetheHBSwillnotregisterthem,andyouwillseeanerror
message.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)