Radwin 5000 - Page 118

RADWIN5000ConfigurationGuide Release4.9.17 4‐40
RADIUS ManagingtheSector
ConfiguringtheRADIUSOption
FromtheConfigurationdialogbox,clicktheRADIUStab.
EnableAuthorizationMode:EnableworkingwithaRADIUSserver.
RADIUSServersConfiguration:EntertheUserNameandPasswordthattheRADIUSserver
usestoidentifyandverifythattheHBSisallowedtoworkwithit.
InstallConfirmationRequired:Ifthisisenabled,thenwhentheHBStriestoregistertheHSUs
initssector,eachHSUmustpermittheHBStodoso.Ifthisisnotenabled,theHBS
canregistertheHSUsinitssectorwithoutfurtheraction.
Thisoptionisuseful,ifforinstanceatechnicianisinstallinganHSU,anditisnot
quitereadytobeactivated.
ToconfirminstallationfromtheHSUside,therearetwooptions:
• OPTION1:LogontothespecificHSU.Onceanattemptatregistrationis
made,youwillseeaConfirmInstallationbuttonontheHSUcard: