Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 3‐8
ActivatinganHBS InstallingaSector
6. FromthepreviousActivationWizardwindow,clickNext.
HereyoumayentertheIPdetailsifyoudidnotdoitearlier.Youcanchooseto
enableonlyIPv4,IPv6,orbothmethods.Onceyouhaveenteredthecorrect
addresses,clickNext.
7. Thenextwindowisusedtosetthefrequencyan
dchannels.
Ifyouskippedanentry,itwi ll beframedinre dlikethis: