Chapter 6
86 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Applying Prescription Maps
A prescription map may be applied to any enabled product during the Start Job process. With the variable rate
feature enabled, the Start Job - Verify Settings screen displays the name of the prescription map along with the
product to which the prescription map will be applied.
To Apply a Prescription Map
1. Touch the Rx symbol in the corresponding Product button.
For example, touch the Rx symbol in the Product 1 button to apply a prescription map to the product
controlled by the first product node.
Note: To remove a prescription map, touch the ‘Prod1’ area of the button to display the Product Setup
screen. Touch the Rate button and enter a value.
2. A list of available prescription maps is displayed on the Start Job - Select Rx Map screen.
Select the name of the prescription map to apply to the selected product and then touch the Accept
icon to apply the prescription map.
Note: To modify the rates within the selected prescription map, select the Rate Conversion button. Use
the on-screen keypad to enter the multiplier of the prescription map for the current job.
3. Verify other job settings before beginning the job. Refer to the Starting a Job section on page 56 for more
information.
To Next Page
Loading...
