6
P/N 016-0171-493 Rev. I 63
Basic Operation
4. Speed or COG Display - Vehicle speed or Course Over Ground is displayed in this area. Touch this area to
toggle between the Speed or COG display.
5. Day/Night Mode - Touch this icon to toggle the Guidance display for day or night operations.
6. Swath Number - During straight line, pivot and fixed contour guidance patterns, the number of the current
swath is displayed in this area. When in Last Pass mode, this area displays LAST.
7. Zoom - Touch the Zoom icon to cycle through the zoom levels on the displayed guidance screen. Pressing
the zoom icon at the maximum zoom level (Level 5) will return to the minimum zoom. Continue pressing the
zoom icon to cycle through the zoom levels as desired.
8. Guidance Pattern - Touch the icon displayed in this area to toggle between the available guidance patterns.
See the Using Guidance Patterns section on page 63 for more information on using specific patterns.
9. Menu - Guidance screen views, path tools and options, and AccuBoom mapping features are all accessible
through the Menu. See the Menu section later in this chapter for more information on using tools and
features found within the Menu.
SmarTrax™ Status Display
If the optional SmarTrax system has been installed, the status of the system will appear on the Guidance
screen.
Using Guidance Patterns
The following Guidance Patterns are available on the Envizio Pro:
• Enhanced Last Pass
• Straight (A-B) Line
• Fixed Contour
• Pivot
Refer to the following descriptions for more information on the available Guidance Patterns as well as using
selected patterns during a job.
To Next Page
Loading...
