3
P/N 016-0171-493 Rev. I 21
Installation
Generation 2 Cable Connections
The chassis cable platform requires the following components:
• Machine specific chassis cable
• Envizio Pro chassis interface cable (P/N 115-0172-001)
• CAN Switch Box kit (P/N 117-5020-001)
Note: Contact a local Raven dealer for switch box options. Refer to the Raven CANbus Network
Installation Manual for additional cabling information for the generation 2 cable platform.
FIGURE 5. Generation 2 Cable Connection Diagram (Drawing Number 054-5000-001)
Note: The CAN Switch Box is not used with the optional Raven OmniRow system.
To Next Page
Loading...
