APPENDIX
I
P/N 016-0171-493 Rev. I 229
A ppendi x I
OmniSeed™
Calibration
OmniSeed Calibration Overview
The field computer will display the following settings on the Calibration Settings screen when interfacing with
an optional Raven OmniSeed system for automatic seed rate control:
• Pressure Calibration
• Fan Calibration
• Metered Weight
The above settings are used to calibrate the field computer for the seeder air cart.
Remote Tank Console
The OmniSeed system also features a remote tank console that may be used while performing catch tests
during meter priming and calibration. Refer to the Remote Calibration Console section on page 238 for
additional information on using the tank console with the Envizio Pro field computer.
Optional Ultrasonic Bin Level Sensors
The OmniSeed system is capable of utilizing optional ultrasonic bin level sensors to monitor the seed bin level
during seeding operations. When ultrasonic sensors are connected, the field computer will display a
percentage of product remaining in the air cart bin during seeding operations.
To Next Page
Loading...
