Chapter 6
80 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Field Boundaries
A field boundary and zone map may be created for each job on the Envizio Pro field computer.
Field Boundary
A field boundary provides a visual reference of the outline of the current field on the display.
Once a field boundary has been completed, the Envizio Pro can calculate and display the area within the field
boundary in acres (English) or hectares (Metric) in field review mode. Only one field boundary may be
recorded per job.
If the optional AccuBoom, automatic section control, system is enabled, a field boundary will also create a
basic zone map of the current field. Refer to Chapter 9, Using AccuBoom™, for more information on field
boundaries with the AccuBoom system or contact a local Raven dealer for more information about the Raven
AccuBoom system.
Zone Maps
If the optional AccuBoom, automatic section control, feature is enabled, a map of spray and/or no-spray zones
may be created and saved with the job. Refer to Chapter 9, Using AccuBoom™, for more information on field
boundaries with the AccuBoom system or contact a local Raven dealer for more information about the Raven
AccuBoom feature.
To Next Page
Loading...
