Appendix J
250 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Area Covered & Coverage Mapping Information
The coverage map and area covered information on the field computer Guidance screen are based on the
GPS location recorded by the field computer.
Application Reports
While interfacing with a Calibrator Zurf, LH5000, or Amatron+ console, the field computer records coverage
area based upon GPS coordinate data. The coverage area in a field may then be output from the field
computer on an application report for use on a home or office PC.
Note: No field or total volume information is recorded by the field computer while interfacing with the
serial control console.
Automatic Variable Rate
If the single product variable rate key (P/N 077-0180-031) is activated, the field computer will send target rate
information to the serial control console for automatic variable rate control and application.
To Next Page
Loading...
Need help?
General
