6
P/N 016-0171-493 Rev. I 77
Basic Operation
Field Markers
Field markers allow the operator to mark locations such as well heads, rock
piles, or points of interest during a field operation. Markers will be displayed
during the operation and will allow the operator to view the marker information.
To place a field marker:
1. Touch the Menu icon in the lower, right corner of the guidance display.
2. Select the Marker icon. A field marker will be placed at the current vehicle
location.
Touch the marker to access marker information or delete the field marker.
Note: Field markers are independent of job information and will be
displayed for subsequent jobs in the area of the field marker.
Marker Information
Touch the base of the marker and select the Information icon to display the Marker Information screen. This
screen displays the marker name, current distance to the marker, and geographic coordinates.
Touch the name field and use the on-screen keyboard to rename the marker.
Note: Marker names should not begin or end with a space.
Delete Markers
To delete a marker, touch the base of the marker and select Delete to remove the field marker.
To Next Page
Loading...
