Chapter 6
76 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
6. Touch the Accept icon to return to the Guidance screen.
The following icons will be displayed on the Guidance screen if the on-screen nudge controls option is set to
enabled.
Guidance Menu Nudge Tools
The nudge feature may also be accessed via the Guidance menu to make small adjustments to the guidance
path if the on-screen nudge tools are not enabled. To Nudge a displayed guidance path without the on-screen
nudge controls:
1. Begin a job and set A and B points for a guidance path using the Straight Line, Fixed Contour or Pivot
patterns.
2. Select the Menu icon in the lower, right corner of the display and select the A-B Tools icon.
The following nudge icons are available in the Menu:
Touch the Nudge Right icon to move
the displayed guidance path to the
right. The distance which the path will
be nudged is determined by the user
defined value for the active nudge.
Touch the Nudge Left icon to move
the displayed guidance path to the
left. The distance which the path will
be nudged is determined by the user
defined value for the active nudge.
Touch the Nudge Right icon to move
the guidance path to the right in 1 inch
[2 cm] increments.
Touch the Nudge Left icon to move
the guidance path to the left in 1 inch
[2 cm] increments.
Nudge
Left/Right
Active Nudge
Value
Total Nudge
applied to
displayed path
To Next Page
Loading...
