P/N 016-0171-493 Rev. I 249
Serial Console Interfaces
Operation
When interfacing with the Calibrator Zurf, LH5000, or Amatron+ console, the field computer displays the user
entered target rate and actual rate from the serial control console in the upper, right corner of the Guidance
screen.
Hopper Contents
The current hopper content volume registered by the Calibrator Zurf console will be displayed in the hopper
content volume display on the field computer Guidance screen. For volume displays with the LH5000 or
Amatron+, use the standard bin volume features as explained in Tank or Bin Indicator section on page 67.
Area Covered
Target Rate
Actual Rate
Hopper Content
Volume
Coverage Map
To Next Page
Loading...
