P/N 016-0171-493 Rev. I 99
Tools Menu
7
Product Control
The Product Control menu displays the current settings and calibration values for the selected product. If
additional product control nodes have been detected by the control system, touch the Select Product icon in
the upper, right corner of the screen to cycle through detected product nodes or control channels.
The Product Control Configuration screen contains several of the calibration numbers which the field computer
requires to provide product control.
Access the product control configuration to adjust the following settings for the product control system:
• Application type
• Speed sensor type and cal
• Valve type and cal
• Product control node cal values
• Volume and area settings
• Feature settings
• Alarm settings
• Section assignments
To Next Page
Loading...
