P/N 016-0171-493 Rev. I 237
Optional Ultrasonic Bin Level Sensors
The Raven OmniSeed system features optional ultrasonic bin level sensors which automatically detect the
level of product remaining in each bin. The bin sensor for each of the first three products must be calibrated to
accurately gauge the amount of product in the bin.
Note: The air cart bins must be empty to calibrate the bin level sensors.
1. Touch the Tools Menu icon and select the Product Control icon from the System menu.
2. Next, select the Volume/Area Settings button from the Product Control Configuration screen.
3. Touch the Bin Level button to display the Bin Height Calibration screen.
4. Use the on-screen keypad to enter the height of the bin (in inches [centimeters]) when empty. The field
computer will use the overall height to determine the percent of product remaining in the bin during field
operations.
To Next Page
Loading...
