CHAPTER
3
P/N 016-0171-493 Rev. I 15
C hapter 3
Installation
Overview of the Installation Process
The following is intended as an overview of the installation process. These instructions cover the basic
installation of the Envizio Pro and necessary hardware. For additional instructions on installing optional
hardware with the field computer, refer to the instructions provided with the optional component(s). Instructions
for building a CAN (Controller Area Network) system can be found in Chapter 4, CAN Networking and
Diagnostics.
Basic installation of the Envizio Pro field computer is as follows:
1. Review kit contents
2. Mount the field computer
3. Mount the DGPS antenna
To Next Page
Loading...
