Raven Envizio Pro - Section Switch Mapping

P/N 016-0171-493 Rev. I 235
Section Switch Mapping
The Envizio Pro provides the ability to customize the section control switch functions as necessary for various
seeder configurations with or without liquid control sections. This capability allows the operator to control a full
seeder and application system using a 10 section switch box or to customize switch functionality to control
multiple sections with one switch.
For Example:
Map liquid product sections 1 and 2 in the figure below to section switch 1 to control both liquid sections using
the same section switch.
FIGURE 2. OmniSeed Section Numbering
Air Seeder
Drill
2
13
49
810
11 13
12
7
6
5
x
x
x
x
xx
xx
x
x
xx
x
(‘x’ indicates
the midpoint of
each section)
Granular Product Sections
(Full Implement Width)
Liquid Product Sections