Appendix F
220 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
21. The WinLoad program should display information in the main panel to indicate that the update is in
progress.
22. Wait for the WinLoad update to complete.
23. Once the update has finished, close the WinLoad application and restart the field computer.
24. Verify that the firmware update was applied successfully:
a. Touch the Tools Menu (blue) button from the field computer Home screen
b. Select the Health icon from the GPS menu. Check that the version displayed on the GPS Health
screen is the new firmware version.
25. Touch the Accept icon to return to the main Tools Menu display.
26. Reset the NMEA and Source settings as appropriate before beginning any field operations.
To Next Page
Loading...
