Appendix K
262 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Nudge Feature
The Nudge Feature allows the operator to fine tune the displayed path for actual field conditions. The Nudge
Feature works especially well with the Raven SmarTrax assisted steering systems. Contact a local Raven
dealer for more information about these systems.
During an active job, touch the Menu button and select the Edit Nudge icon to display the In Job
Nudge Settings screen. This screen allows the operator to enable the on-screen nudge controls,
adjust the nudge values and select the active nudge applied when the nudge icons are selected.
See the Nudge Feature section on page 75 for more information on setting up and using the
Nudge Feature.
On-Screen Nudge Enabled
The following icons will be displayed on the Guidance screen if the on-screen nudge controls option is set to
Enabled.
Touch the Nudge Right icon to move the displayed guidance path to the right. The distance which
the path will be nudged is determined by the user defined value for the Active Nudge.
Touch the Nudge left icon to move the displayed guidance path to the left. The distance which the
path will be nudged is determined by the user defined value for the active nudge.
A-B Tools Menu Nudge
The following nudge icons appear in the Menu on the Guidance screen. Touch the Menu icon and select the
A-B Tools icon to access the following nudge tools.
Touch the Nudge Right icon in the A-B Tools menu to move the guidance path to the right in 1 inch
[2 cm] increments.
Touch the Nudge Left icon in the A-B Tools menu to move the guidance path to the left in 1 inch [2
cm] increments.
To Next Page
Loading...
