Chapter 3
28 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Use one of the following Raven RS-232 cables to connect the serial port on the back of the serial control
console to the connector labeled ‘Console’ on the Envizio Pro interface cable.
Note: Use only a Raven RS-232 communication cable between the field computer and the serial control
console. Contact a local Raven dealer for purchasing and more information.
See Chapter 7, Tools Menu, to setup the field computer for the serial console connection.
AutoBoom
®
Follow the machine or implement specific installation manual to install the AutoBoom hydraulic valve and
hoses.
CANbus Network Connection
Envizio Pro field computers are capable of controlling up to four product nodes or control channels (with
required activation keys) on a CANbus system. The field computer will automatically scan for CAN product
control, planter control, AccuBoom, AutoBoom, SmarTrax, boom sense and speed nodes connected through
the CAN connection.
See Chapter 4, CAN Networking and Diagnostics, or the Raven CANbus Installation Manual, for additional
information.
Description Part Number
RS-232 cable - 3 ft. 115-0171-040
RS-232 cable - 10 ft. 115-0159-822
NOTICE
Read all safety requirements and precautions in
the machine specific installation manual prior to
operating a machine equipped with the
AutoBoom feature. Failure to follow safety
precautions may lead to damage to equipment,
injury or death.
To Next Page
Loading...
