Chapter 6
84 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Reference Point
Note: When the drift shift feature is enabled, the field computer will automatically place a reference point
at the start of each job. The reference point will allow the machine operator to quickly shift field
features by shifting all field features based upon the current vehicle position and the reference
point set or configured by the machine operator.
Reference Point Settings:
1. Touch the Menu icon in the lower, right corner of the guidance display.
2. Select the Drift Shift icon.
3. Touch the Drift Shift icon displayed in the lower, right corner of the display to access the Drift Shift Settings
screen. Use the following features to set the reference point or shift the coverage features:
Set Drift Correction Now. With the vehicle positioned at the actual reference point, touch the “Set Now”
button to shift the reference point and all field features to the current vehicle position.
Set Reference Point Here. Touch the “Set Here” button to reset the reference point to the current vehicle
location. The previous reference position will be lost.
To Next Page
Loading...
