Chapter 4: Using the Chart 85
To add a waypoint within a route:
Note:
You can also use the method described on page 83, to add a waypoint within a
route.
Add a waypoint(s) to the end of a route
This option inserts a waypoint (or series of waypoints) at the end of a route in order to
extend its existing course. You can create new waypoints for this purpose and/or use a
waypoint that already exists in the system.
1. Select the appropriate route for editing (see
page 82
).
2. Select the amend route course option:
3. Define new or existing waypoint:
D8373_1
INSERT
WAYPOINT
PLACE
WAYPOINT
Move cursor
over appropriate
leg of route
Stretch to
position for
new waypoint
Route course changes
Route index re-
numbers
RTE
RTE
D8382_1
AMEND ROUTE
COURSE...
D8380_1
USE WAYPOINT
LIST...
Or:
Define new waypoint
Use existing waypoint
Select waypoint for insertion.
Make Route
Waypoints
Harbour Ent.
Midchannel
Outer Harbour
Waypoint 4
50
0
16'.75N
001
0
6'.095W
50
0
47'.356N
001
0
6'.604W
ierhea
Sunday tour
01 Midchannel
02 Outer Harbour
03 Harbour Ent.
Drag cursor to required position for
additional waypoint
1
2
3
RTE
81244_4.book Page 85 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
