166 E-Series Networked Display Reference Manual
The range of the radar is adjusted by pressing the RANGE button.
Press IN to decrease the range scale or ‘zoom in’.
Press OUT to increase the range scale or ‘zooms out.
Each press of the button changes the range by one setting. Pressing and holding the
button will change the range quickly in the required direction.
Radar range and chart scale synchronization
The chart application includes an option to synchronize the radar range and chart
scale.
When synchronization is switched on:
• The radar range in all radar windows, changes to match the chart scale.
• ‘Sync’ is indicated in the top left-hand corner of the chart window.
• If you change the radar range, in any radar window, all synchronized chart views
change scale to match.
• If you change the scale of a synchronized chart window, all radar windows change
range to match.
With a chart window active, set the radar range synchronization:
Note:
Radar range synchronization is not available when the chart motion mode is set
to Autorange.
D6585-2
RANGE
IN
OUT
D7578-3
CHART MODE AND
ORIENTATION…
CHART SYNC
PRESENTATION…
RDR
81244_4.book Page 166 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
