Raymarine E-Series - Combined Range and Bearing; Tracking a Target with a VRM or EBL

204 E-Series Networked Display Reference Manual
When this line is rotated to align with a target, the bearing relative to your current
heading is measured and displayed on the ADJUST EBL softkey label.
The data is also displayed if you select the EBL with the cursor.
To change the EBL reference from relative to magnetic or true, see
page 196 .
Combined range and bearing
You can combine a VRM and an EBL to measure range and bearing simultaneously:
Tracking a target with a VRM or EBL
You can tell which direction an object is travelling in by tracking its movement in
relation to the EBL. If it continues travelling towards the EBL, it could be on a
collision course with your boat.
To create a VRM or an EBL
1. Press the VRM/EBL softkey.
2. Toggle to ON with the VRM/EBL softkey.
D8425_1
EBL
D8403_1
EBL
VRM
Target
81244_4.book Page 204 Thursday, January 31, 2008 1:53 PM