Chapter 18: System setup and customizing 275
Chapter 18: System setup and customizing
This chapter describes how to setup and customize your E-Series display. Any settings
that you change will be stored by the display and shown each time you power on. You
can, of course change these settings as many times as you wish.
18.1 Changing the data master
For Networked E-Series systems only: To change the data master from that
already specified, please see
page 30.
18.2 Customizing the page sets
Each page set provides access to 5 different pages. Each page can display up to four
application windows. With the exception of Video, you can view multiple windows of
the same application. For example you could have two chart application on one page -
one to view a large scale chart, the other for a detailed view of your immediate
surroundings.
If none of these meet your particular requirements you can edit the page sets to display
the application and page layout that suits your particular needs. This process should
also be used if you wish to run a video, engine monitor or weather application.
In addition, you can rename of any of the page sets to a title that is more meaningful.
A control is also provided to reset the selected page set to the factory default
configuration.
81244_4.book Page 275 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
