Raymarine E-Series - Stop Navigating to Your Target Waypoint; Maintaining a View of Your Navigation; Building and Following a Route

72 E-Series Networked Display Reference Manual
To de-activate the arrival alarm
Stop navigating to your target waypoint
To stop navigating towards the selected waypoint:
o
Maintaining a view of your navigation
By selecting Auto Range mode, your chart will automatically adjust the range to
maintain both your boat and the target waypoint on screen, using the largest scale
possible.
To select Auto Range mode:
Note: For more detail, see Setting the motion mode on page 101.
4.10 Building and following a route
This section describes how to use routes and includes the following:
• What is a route?
• What can I do with a route?
• Building and saving a route.
• Following a route.
• Viewing details of routes.
D8325_2
NAVIGATION ALARM
Waypoint Arrival
D8326_1
ACKNOWLEDGE
Wait 10 seconds
Or
D8324_1
GOTO... STOP GOTO
PRESENTATION
D7509-2
CHART MODE AND
ORIENTATION
AR
SHOW/HIDE
ROUTES ...
FOLLOW ROUTE
OPTIONS ...
BUILD NEW
ROUTE ...
REVIEW AND EDIT
ROUTES ...
D6534-2
81244_4.book Page 72 Thursday, January 31, 2008 1:53 PM