238 E-Series Networked Display Reference Manual
Pre-requisites for using the weather application
For your E-Series to display weather data, your system must be connected to a
Raymarine SR100 Sirius weather receiver which is supplying the appropriate data.
For your vessel to be displayed and for weather reports to be available at your
position, you will need a fix for your boat’s position and be within US coastal waters.
Note:
For further information on installing and commissioning a weather receiver, please
refer to the Weather Receiver Installation Guide.
Adding a weather application
A weather application does not appear in the pre-configured page sets. You will
therefore need to customize a page set to include a weather application window.
Please refer to
page 275
for details.
Specifying the weather elements
You can view textual reports or animated graphics and specify the weather elements
that you require:
1. Open a weather application window.
2. Display the weather graphics menu:
3. Select the weather elements for display:
D8614-2
Storm Cast OFF
Sea Surface Temp OFF
Canadian Radar OFF
Storm Tracks OFF
Lightning OFF
Surface Ob Stations OFF
Cities OFF
Wind OFF
Wave Height OFF
Wave Period OFF
Wave Direction OFF
Surface Pressure OFF
Weather Graphics
N
WR
DISPLAY
GRAPHICS...
D8563-1
OK
OK
Highlight required option
Enter option
Toggle ON or OFF as required
Repeat until all options set as required
81244_4.book Page 238 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
